CLOSURE TOOLING · INDIA
Built for the seal. Engineered for repetition.
A 16-cavity closure tool built around the thread, seal and tamper band for large-format jar applications.
THE PROJECT LOGIC
The product
sets the direction.
01 / Production brief
Produce 48 mm closures for 5 L and 10 L jars, with a specified output of 125,000 pieces per 24 hours of operation.
02 / Engineering approach
Develop the thread, sealing surface and tamper geometry together with the needle-valve hot runner. Arrange 16 positions as two columns of eight in the upright mould.
03 / Delivered scope
A closure mould with a defined product interface, cavity layout and hot-runner configuration, with materials selected by component wear function.
PROJECT SPECIFICATION
Product, equipment
& output.
| Parameter | Project specification |
|---|---|
| Mould cavities | 16 |
| Cavity layout | 2 × 8 · upright |
| Specified output | 125,000 pieces / 24 h |
| Closure diameter | 48 mm |
| Application | 5 L + 10 L jars |
| Mould envelope | 750 × 850 × 535 mm |
| Hot runner | Needle-valve |
| Functional scope | Thread + seal + tamper band |
The output is stated per 24 hours of operation. Machine selection and the final cycle must be evaluated for the actual resin, tool and operating conditions.
PROJECT GEOGRAPHY
India
Delivered project in India. Customer identity is kept confidential.
AT A GLANCE
The working sequence.
- 01Define neck & seal
- 02Develop closure geometry
- 03Configure 16 cavities
- 04Match tool to production
START WITH YOUR PRODUCT
What do you want
to make next?
Tell us the product, target output and destination.
We’ll work from there.